Search results

This paper aims to explore the influence of corrosion-deformation interactions (CDI) on the corrosion behavior and mechanisms of 316LN under applied tensile stresses.

Corrosion of metals would be aggravated by CDI under applied stress. Notably, the presence of nitrogen in 316LN austenitic stainless steel (SS) would enhance the corrosion resistance compared to the nitrogen-absent 316L SS. To clarify the CDI behaviors, electrochemical corrosion experiments were performed on 316LN specimens under different applied stress levels. Complementary analyses, including three-dimensional morphological examinations by KH-7700 digital microscope and scanning electron microscopy coupled with energy dispersive spectroscopy, were conducted to investigate the macroscopic and microscopic corrosion morphology and to characterize the composition of corrosion products within pits. Furthermore, ion chromatography was used to analyze the solution composition variations after immersion corrosion tests of 316LN in a 6 wt.% FeCl₃ solution compared to original FeCl₃ solution. Electrochemical experiment results revealed the linear decrease in free corrosion potential with increasing applied stress. Electrochemical impedance spectroscopy results indicated that high tensile stress level damaged the integrity of passivation film, as evidenced by the remarkable reduction in electrochemical impedance. Ion chromatography analyses proved the concentrations increase of NO₃⁻ and NH₄⁺ ion concentrations in the corrosion media after corrosion tests.

The enhanced corrosion resistance of 316LN SS is attributable to the presence of nitrogen.

The scope of this study is confined to the influence of tensile stress on the electrochemical corrosion of 316LN at ambient temperatures; it does not encompass the potential effects of elevated temperatures or compressive stress.

The resistance to stress electrochemical corrosion in SS may be enhanced through nitrogen alloying.

This paper presents a systematic investigation into the stress electrochemical corrosion of 316LN, marking the inaugural study of its impact on corrosion behaviors and underlying mechanisms.

The purpose of this paper is to investigate the effect of pulsed magnetic field (PMF) with different duty cycles on the melt flow and heat transfer behaviors during direct-chill (DC) casting of large-size magnesium alloy billet and find the appropriate range of duty cycle.

A transient two-dimensional mathematical model coupled electromagnetic field, flow field and thermal field, is conducted to study the melt flow and temperature field under PMF and compared with that under the harmonic magnetic field.

The results reveal that melt vibration and fluctuation are generated due to the instantaneous impact of repeated thrust and pull effects of Lorentz force under PMF. The peak of Lorentz force decreases greatly with the increasing duty cycle, but the melt fluctuation region is expanded with higher duty cycle, which accelerates the interior melt velocity and reduces the temperature gradient at the liquid-solid interface. However, PMF with overly high duty cycle has adverse effect on the melt convection and limited influence on the interior melt. A duty cycle of 20% to 50% is a reasonable range.

This paper can provide guiding significance for the setting of duty cycle parameters on DC casting under PMF.

There are few reports on the effect of PMF parameters during DC casting with applying PMF, especially for duty cycle, a parameter unique to PMF. The findings will be helpful for applying the external field of PMF on DC casting.

This chapter proposes a new architecture to address challenges to security and the privacy in e-healthcare under Industry 5.0. With the growing needs for high-quality medical treatment and the continuously growing costs of treating global medical problems, systems and web-based medical care are regarded as innovative solutions. In particular, the new progress in Internet of Things (IoT) has led to the development of Internet of Medical Things (IoMT). The patient history data is handled and processed remotely in real-time rather than visiting any clinic and then having that data transferred for subsequent use to third parties, such as data that gets saved in the cloud. This patient data faced security threats and it is observed as major limitations of using such systems in Industry 5.0. This chapter analyzes the security and secrecy challenges, together with the necessities, the danger involved and proposed secured blockchain-based framework which is capable of future research scope in Industry 5.0. The study has described an Eye Hospital case study that stores the eye donors’ details. With such critical scenario, this study addresses healthcare scenario with poverty-led agenda and social developmental features.

The purpose of this study is to determine if an earnings forecasting model based on factors hypothesised to result in differential profits across firms (industries) reduces model error relative to the model developed by Ou (1990). Initial research attempting to forecast earnings found that the random walk model, where current year's earnings are the prediction for next year, provides the best forecast of annual earnings (Ball and Watts 1972; Foster 1973; Beaver, Kettler, and Scholes 1970; Albrecht, Lookabill, and McKeown 1977; Brealey 1969). Ou (1990) developed an earnings forecasting model using financial statement information beyond prior years' earnings as the explanatory variables that outperformed the random walk model in predicting annual earnings.

This paper aims to classify the inductorless Chua’s circuits into two types from the topological structures and construct a chaotic circuit under this new classification framework.

In this paper, two types of inductorless Chua’s circuit models are presented from topological structure, among which the first type of inductorless Chua’s circuit (FTICC) model is much closer to the original Chua’s circuit. Under this classification framework, a new inductorless Chua’s circuit that belongs to the FTICC model is built by replacing LC parallel resonance of the original Chua’s circuit with a second order Sallen–Key band pass filter.

Compared with a paradigm of a reported inductorless Chua’s circuit that belongs to the second type of inductorless Chua’s circuit (STICC) model, the newly proposed circuit can present the attractors which are much more closely to the original Chua’s attractors. The dynamical behaviors of coexisting period-doubling bifurcation patterns and boundary crisis are discovered in the newly proposed circuit from both numerical simulations and experimental measurements. Moreover, a crisis scenario is observed that unmixed pairs of symmetric coexisting limit cycles with period-3 traverse through the entire parameter interval between coexisting single-scroll chaotic attractors and double-scroll chaotic attractor.

The newly constructed circuit enriches the family of inductorless Chua’s circuits, and its simple topology with small printed circuit board size facilitates the various types of engineering applications based on chaos.

The service environment of urban polyethylene (PE) pipes has a crucial influence on their long-term safety and performance. Based on the application and structural performance analysis of PE pipe failure cases, this study aims to investigate the impact of organic substances in the soil on the aging behavior of PE pipes by designing organic solutions with different concentrations, which are based on the composition of organic substances in the soil environment, and periodic immersion tests.

Soil samples in the vicinity of the failed pipes were analyzed by gas chromatography-mass spectrometry, sensitive organic substances were screened and soaking solutions of different concentrations were designed. After the soaking test, the PE pipe samples were analyzed using differential scanning calorimetry, Fourier-transform infrared spectroscopy and other testing methods.

The performance difference between the outer surface and the middle of the cross section of PE pipes highlights the influence of the soil service environment on their aging. Different organic solutions can have varying impacts on the aging behavior of PE pipes when immersed. For instance, when exposed to amine organic solutions, PE pipes may have an increased weight and decreased material yield strength, although there is no reduction in their thermal or oxygen stability. On the contrary, when subjected to ether organic solutions, the surface of PE pipe specimens may be affected, leading to a reduction in material fracture elongation and a decrease in their thermal and oxygen stability. Furthermore, immersion in either amine or ether organic solutions may result in the production of hydroxyl and other aging groups on the surface of the material.

Understanding the potential impact of organic substances in the soil environment on the aging of PE pipe ensures the long-term performance and safety of urban PE pipe. This research approach will provide valuable insights into improving the durability and reliability of urban PE pipes in soil environments.

In this paper the aim is that Aramid/alginate blended nonwoven fabrics were prepared, and the flame retardancy of the blended nonwoven fabrics was studied by thermogravimetric analysis, vertical flame test, limiting oxygen index (LOI) and cone calorimeter test.

The advantages of different fibers can be combined by blending, and the defects may be remedied. The study investigates whether incorporating alginate fibers into aramid fibers can enhance the flame retardancy and reduce the smoke production of prepared aramid/alginate blended nonwoven fabrics.

Thermogravimetric analysis indicated that alginate fibers could effectively inhibit the combustion performance of aramid fibers at a higher temperature zone, leaving more residual chars for heat isolation. And vertical flame test, LOI and cone calorimeter test testified that the incorporation of alginate fibers improved the flame retardancy and fire behaviors. When the ratio of alginate fibers for aramid/alginate blended nonwoven fabrics reached 80%, the incorporation of alginate fibers could notably decreased peak-heat release rate (54%), total heat release (THR) (29%), peak-smoke production rate (93%) and total smoke production (86%). What is more, the lower smoke production rate and lower THR of the blends vastly reduced the risk of secondary injury in fires.

This study proposes to inhibit the flue gas release of aramid fiber and enhance the flame retardant by mixing with alginate fiber, and proposes that alginate fiber can be used as a biological smoke inhibitor, as well as a flame retardant for aramid fiber.

This paper aims to investigate the influence of “BroncoCut-X” (copper core-ZnCu50 coating) electrode on the machining of Ti-3Al-2.5V in view of its extensive use in aerospace and medical applications. The machining parameters are selected as Spark-off Time (ST_off), Spark-on Time (ST_on), Wire-speed (S_w), Wire-Tension (WT) and Servo-Voltage (S_v) to explore the machining outcomes. The response characteristics are measured in terms of material removal rate (MRR), average kerf width (KW) and average-surface roughness (SA).

Taguchi’s approach is used to design the experiment. The “AC Progress V2 high precision CNC-WEDM” is used to conduct the experiments with ϕ 0.25 mm diameter wire electrode. The machining performance characteristics are examined using main effect plots and analysis of variance. The grey-relation analysis and fuzzy interference system techniques have been developed to combine (called grey-fuzzy reasoning grade) the experimental response while Rao-Algorithm is used to calculate the optimal performance.

The hybrid optimization result is obtained as ST_off = 50µs, ST_on = 105µs, S_w = 7 m/min, WT = 12N and S_v=20V. Additionally, the result is compared with the firefly algorithm and improved gray-wolf optimizer to check the efficacy of the intended approach. The confirmatory test has been further conducted to verify optimization results and recorded 8.14% overall machinability enhancement. Moreover, the scanning electron microscopy analysis further demonstrated effectiveness in the WEDMed surface with a maximum 4.32 µm recast layer.

The adopted methodology helped to attain the highest machinability level. To the best of the authors’ knowledge, this work is the first investigation within the considered parametric range and adopted optimization technique for Ti-3Al-2.5V using the wire-electro discharge machining.

The purpose of this paper is to find the variations of brake lining's frictional performance with braking conditions, and their influence on the braking safety and reliability of automobiles.

As the semimetal brake lining is widely used currently in automobiles, it was selected as the experimental material. By simulating the braking conditions and environment of automobiles, some tribological experiments of the brake lining were investigated on the X‐DM friction tester, when it is paired with the friction disc made of gray cast iron. The influence of braking pressure, sliding velocity and surface temperature on the friction coefficient and its stability coefficient were studied in depth through experiments.

The friction coefficient decreases gradually with the increasing of braking pressure and sliding velocity when the surface temperature is naturally rising. It rises first then falls with the surface temperature rising and the maximal value appears at nearly 200°C. The stability of friction coefficient decreases obviously when the sliding velocity exceeds 30 m/s, the braking pressure exceeds 1.8 MPa and the surface temperature is over 200°C. Based on the experimental results, the authors consider that it is not reliable to execute an emergency braking only by rising the braking pressure when the automobile is driving with a high velocity. In order to reduce the bad influence of high temperature on frictional performance, some effective actions should be taken for cooling the friction disc. What is more, special attention should be paid to the decreasing of frictional stability during the braking with high velocity, pressure and temperature.

This paper studies the influence of braking conditions on friction coefficient and its stability of the semimetal brake lining for automobiles. It is believed that this research may have some actual guidance for enhancing the braking safety and reliability of automobiles.

The purpose of this paper is to develop an eccentric model to examine the factors that influence environmental performance in organizations based on belief–action–outcome framework and natural resource-based view theory.

Data were collected by employing online survey from respondents in organizations to statistically test the eccentric model and its associated hypotheses. Partial least squares–structural equation modeling and Statistical Package for Social Sciences were utilized to analyze the survey data.

The results show that information technology (IT) professionals and IT executives’ behavior positively influences environmental performance. Further results suggest that the belief of IT professionals and IT executives is significantly influenced by the action of IT infrastructure, institutional pressure, organizational strategy and information diffusion. In addition, results reveal that the action of IT infrastructure, institutional pressure, organizational strategy and information diffusion in organizations significantly has an impact on the outcome of environmental performance. Moreover, results indicate that green information systems (IS) for pollution prevention, product stewardship and clean development initiatives adopted positively influence the environmental performance of organizations.

The developed eccentric model further shows how green IS practice integration can improve environmental performance. However, the selected respondents are from a single country as such findings from this study cannot be generalized to other countries.

Practically, this paper has implications for the capability of IS to promote environmental performance in organizations.

This study provides a pertinent contribution in developing and validating an eccentric model for green IS adoption. Besides, a survey instrument is developed that can be used by future studies.

The developed model helps to explore the factors that influence environmental performance and also the outcomes of green IS adoption for environmental performance. Accordingly, IT professionals and IT executives can draw upon the eccentric model in assessing their current environmental-friendly practice for the effective initialization of green IS for corporate value.